I Almost Forgot....

Someone recently pointed out to me that I never posted final pictures of the bathroom.  We have been using it for almost a year now so this post is a bit overdue.  It took us a little longer to finish all of the trim. Some of these pictures make the room look very yellow which it isn't -- someday I'll have to learn how to use the white balance on our camera!

Just past the door on the right used to be a wall so the linen cabinet, second vanity, and new closet are located in what used to be a closet!

We took out an old tiled shower and added a bathtub. I'm not sure the shower curtain is permanent but it works for now. The dark circle in the ceiling is a vent.  The cover still needs to be painted.

With niches....(I LOVE the niches)

And some artwork (one of only two rooms in the house that we actually have pictures on the walls!).  We originally saw a set of these prints at a local lighting store and we thought they were a bit pricey.  We tried to look up the name of the artist online in the hopes that we could buy unframed prints (we thought it was fancy!).  Then one day I found these at Kohl's (they were very cheap!) and I have seen them at multiple stores since. So here's to cheap reproducible art, but at least it has a good story. 

Not to spend too much time on a toilet but we do love this Kohler model.  It has a great easy-clean function to remove the entire seat that we didn't even know about when we bought it.

 

 

This window finally got a blind and some trim.  It still needs some sort of window treatment but I haven't found a fabric I like yet.

We love the vanities and linen cabinet.  We have more storage than we know what to do with! Andy is still working on some crown moulding for around the tall linen cabinet.

And the closet at the end of the room is dedicated to some additional storage and some of Andy's clothes.

 

It's a slight improvement over the original!!!!

New Outlets and a Hidden Surprise

When Andy did the electric work for the bathroom he installed wiring for three outlets: one behind each vanity and one in the linen closet so that we could leave my hairdryer and his shaver plugged in but not out on the counter.  We wanted the outlets behind the vanities to be horizontal instead of vertical and it was easier to place them after the drywall was done and vanities were in place so we could get them exactly where we wanted them.

Cutting a hole in the new wall!

Searching for and locating the new wiring.

Ready to go!

I guess this is Andy's challenge to the Manning family.  Diagonal screw alignment?  Anyone? Anyone? (Bueller? Bueller?)

After we figured out where we wanted the new outlet in the cabinet Andy drilled holes around the permitter of the new location.  (I'm so glad he's comfortable cutting into our brand new cabinets!)

Found the new wiring and pulled it into the cabinet.

All set and ready for shelves.  We are using the bathroom and the new outlet in the linen cabinet is great!  Unfortunately, we had a hard drive crash so I'll have to put the finished picture in another post.  The good new is that once the new drive arrives we should be able to recover most of our data from the busted drive and our backup. 

Clamps Required

After we got all of the cabinets upstairs we realized that we needed a little assistance getting them all set, attached to the wall, and level.  We checked the floors and walls for level several times during the renovation, but the length and height of the vanity really highlighted some of the imperfections of our older home. Enter Kyle Wise and his amazing cabinet clamps.  These magical inventions allowed us to clamp all of the cabinets together and attach them to each other with screws.

While the cabinets were clamped together Andy was able to mark and repair one of our cabinet flaws.  The area below with the red pencil highlights the gap between the vanity top and the linen cabinet.  This gap was the reason Home Depot reordered the linen cabinet 3 times and would have ordered it a 4th time if we hadn't asked some more questions.  

This may seem minor, but we made sure to ask when we ordered the cabinets that the edge of the linen cabinet would be completely flush so that the vanity top would be completely flush with the side of the cabinet.  The order was for a flush side, but apparently this 1/8" offset is what the manufacturer considers flush.

Andy was able to practice on one of the reordered cabinets we have leftover in the basement and he created a jig to use with his router to remove a portion of the cabinet so that the vanity top would be flush with the cabinet.

Before Andy screwed the cabinets together he installed this EZ level system on the bottom of each cabinet instead of using shims.

Each system is installed to the side of cabinet and has a separate leveling system for the front and back of the cabinet so that you can level each corner independently.

With the linen cabinet routed and the leveling system installed it was time to attach the cabinets to each other and attach the whole system to the wall.

Nice and level! Andy glued the counter tops to the cabinets, installed the backsplashes and connected all of the plumbing so the sinks are fully functional.

With the overhang on the linen cabinet removed the vanity tops fit perfectly flush with the cabinet.

And the last critical element for the vanity was installing the knobs.

Fully Functional

I'm behind on my blog updates.  Hopefully I'll get up-to-speed this week.  

Two weeks ago we had a full weekend at home and were able to get the new master bathroom fully functional.  Andy prepared the tub and tile for caulk.

We picked a slightly darker grout so we didn't want white or almond caulk because it would have been too light.  Andy put the silicone caulk in a ziploc bag.

Added some dry grout and mixed until it matched the grout.

Then he cut off the tip of the bag an applied the caulk.

Almost ready.  Once the caulk was dry I was able to scrub the tub and tile to get it ready to be sealed.

Nice match!

Then I applied three coats of grout sealer.  It had to dry for 24 hours but was ready the next evening for Andy's first shower in the new bathroom.

A New Loo

We are one flush step closer to a fully functioning bathroom.  After the floor was finished Andy replaced the original copper flange and installed the new baseboard heater.

 

The toilet is not centered between the tub and the vanity, but it is centered on the window above.  This is the only plumbing fixture that we didn't relocate as part of the renovation.  We actually like that the toilet is centered on the window but gives us more space on the tub side for getting in and out of the shower.

This is a same Kohler model that we installed in the hall bathroom.  We were very happy with the first one, so it was an easy decision (possibly the only easy decision in the whole bathroom remodel!).  User beware -- we may still be missing one small detail -- toilet paper!!